Pair 4x100 Hubcentric Spacers, 30mm Wide 57.1CB 8 Wheel Bolts VW AUDI UK Made
Welcome to our page!
For sale we have our custom-made 4 x 100 Wheel Spacers sold in pairs with 8 x Extended M12 x 1.5 HT wheel bolts
55mm & 60mm Thread length available, please specify at CHECKOUT which you require
Taper and Radius bolts available, please message us your BOLT requirement at CHECKOUT
Spacers are 30mm wide giving 60mm overall increase across the axle
These spacers are designed to fit a 57.1mm HUB and wheel bore. VW fitment.
· All our custom-made spacers and adapters are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ.
One of the most cost-effective mods on the market and easy to fit in 7 stepsSimply unbolt your wheel and remove.Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)Apply a little copper grease or similar to stop the faces sticking together.Slide the spacer on to your existing hub.Check the spacer is sitting flush against the original hub with no visible gapGently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.Secure the wheel with the extended bolts and torque them to the required spec.
Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.
All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD. Visit www.watfields.com
Please contact us to discuss any enquiries you may have