Wheel Spacers Specs:
||Each Spacer would be 15mm Wide
|Hub Bore Size
|Vehicle Bolt Pattern
||5 x 100 mm & 5 x 112 mm
|Adapter Bolt Pattern
1. Forged Aluminum Alloy: made of Aerospace Grade 6061-T6 Aluminum, ensuring the highest level of performance and durability for your automobile, T6 heat treatment can greatly improve the rigidity.
2. Grade 10.9 Bolts: Made of Premium materials, ensuring outstanding performance
3. Precisely Machined: CNC machined with 60 degree taper to precise specifications, heat treated and hardened heavy duty spacers and studs for safety.
4. Increase Stability and Handling: widen your vehicle’s wheel base, increasing overall stability and providing you with better handling.
5. Aggressive appearance, with the widened track base, your favorite vehicle will get a cooler look
Safety guidelines(Minimum number of turns for wheel bolts/nuts)
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
How much standard torque force of different lug bolts or nuts is?
M12: 113NM(83.3Ft-tb); M14: 140NM(103.5Ft-tb); 1/2-20: 130NM(95.8Ft-tb)
Wheel Spacers Specs:
STEP1. Check 3 Parameters
Please check the vehicle’s parameters, and make sure they meet all the requires below, otherwise the spacers will not fit.
Bolt Pattern(PCD) = 5x100mm & 5x112 Hub Bore < = 57.1mm Thread Pitch = 14x1.5
If you don’t know the specific parameters of your vehicle, please confirm by following the below steps.
1). Check Vehicle Bolt Pattern/PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole.
5 lug is different, you need to measure the segment from the OUTERMOST point（not center point）of a bolt hole TO the CENTER of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/127mm, and as there are 5 lugs, then the bolt pattern is 5x5.5"/5x127mm.
2). Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3).Check Vehicle Thread Pitch
There are different types of studs, such as M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle’s, otherwise the spacer will not fit.
STEP2. Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point.( The most closest spot may be at the front or rear edge of the fender).
The maximum recommended spacer thickness= the smallest gap - 3/8”(10mm)
Steps for Installation Wheel Spacers
We accept PayPal payment only, and must be received within 3 days from the date of purchase.
Please leave note in PayPal when making the payment if you have any special requests.
Orders will be processed instantly and dispatched within 1-2 days, so we do NOT accept any email/message note after you place orders.
We offer WORLDWIDE SHIPPING.
Attention: Additional shipping fee will be charged for the customer from AK ,PR , HI. Please contact our customer service for the details of the extra shipping fee. Hope your understanding, thanks.
Orders will be processed and dispatched within 24-48 hours after payment is clear.
We only ship to confirmed addresses. Your address MUST MATCH your Shipping address.
The Express company can not accept the PO BOX address. please provide your valid physical street address.
If you have not received your shipment within 30 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!
We offer 14 days return policy. Please contact us within 14 days t from the date you receive your order if you have any issues with the product and would like to return.
All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your ID.
We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement.
Buyer is responsible for return shipping cost.